Skip to content
Underhill International Corporation
Toggle mobile menu
- On orders over $400 -
Reels & Carts
Hose End Valves
Wetting Agents & Applicators
GULP Series Pumps
Profile FCI Nozzles
For Toro Series
For RainBird Series
Tools for Profile Nozzles
Deep Watering Stakes
2 Wire Irrigation Products
Nav Menu 3
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
The CLAW 1 1/2"
Keeps Quick Coupler valve body from loosening in the ground - prevents dangerous situation during valve operation. Easily attaches to valve body without removing or cutting valve box. Deep tine design for soggy and less stable soils.
The Underhill Quick Coupler Claw is made from high strength ductile iron and comes in two sizes. The Claw fits 1 1/2" valves. Quick Coupler Claws restrain rotational, vertical and horizontal motions of the quick coupler valve. They are cast in one piece of ductile iron and attach to the quick coupler valve by means of hexagonal receptacle and a single Type 316 stainless steel bolt. The Claw shall have two tines aligned vertically and oriented 90º to each other. These tines shall extend a minimum of 6" below the plane of the attachment. The Claw fits within valve boxes without cutting the box.
1. Install swing joint and quick coupler valve
2. Engage hex portion of the quick coupler valve with the hex portion of the Claw and tighten bolt
3. Set quick coupler valve as required, backfilling and compacting soil around the Claw.
Underhill's Quick Coupler Claw securely attaches to the base of the quick coupler valve. Once embeded in the soil, the Claw prevents movement of the quick coupler. It will fit inside most valve boxes and, unlike similar products, there is no need to cut the valve box to make it fit, This benefit saves valuable installation time while also retiaining the structural integrity of the valve box.
Easy retrofit installation. Installs without removing valve or valve box.
Made of one piece ductile iron and stainless steel
Available for 1 1/2" valves
You might also consider the following products
Brass Quick Coupler 1 1/2"
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item: